Qtopia-4.3.0 for A780. Openezx-2.6.23-1 kernel.

[borgs]

any new progress?

[goxboxlive]

any new progress?

Well, if you are thinking about the phone we havent made that work yet. I have no idea how to make the multiplexer for it so i have to get some help for that.
But, i have dome some progress with the Qtopia image. I have added some applications to it and it runs a little smoother.

I just have to polish it a little before i upload it. I would also like to wait until the bluetooth issue in kernel 2.6.24 is fixed.

[blackhawk]

Hi goxboxlive, can you share your Qtopia 4 building knowledge? I have qtopia-opensource-4.3.1 now. Is it possible running Qtopia 4 on EZX supplied kernel? Thanks.

@swifty
Thanks for pointed me to this thread.

[swifty]

/me waiting too

[Kuddel]

Hi,
thank you for your nice work!!!
I tested Qtopia with boot_usb and it worked. But using this image with dual_boot and the alternate kernel did not work. With dual_boot I can only boot those images from Ångström. Can I some how make Qtopia run with the zImage-2.6.23-1-mtd-a780-alternate kernel.

[siD]

Hi, is possible ssh access to Qtopia? Ping is working, but ssh not

# ping 192.168.0.202
PING 192.168.0.202 (192.168.0.202) 56(84) bytes of data.
64 bytes from 192.168.0.202: icmp_seq=1 ttl=64 time=0.690 ms
64 bytes from 192.168.0.202: icmp_seq=2 ttl=64 time=0.713 ms
64 bytes from 192.168.0.202: icmp_seq=3 ttl=64 time=0.635 ms
64 bytes from 192.168.0.202: icmp_seq=4 ttl=64 time=0.653 ms

# ssh 192.168.0.202
ssh: connect to host 192.168.0.202 port 22: Connection refused
#

[siD]

My fault, SSH is working. I had damaged any files after rootfs extracting.

[Kuddel]

As long as the system boots up I get a ping. But after Qtopia starts I can not ping the phone, there is no device present anymore, when I list the usb devices on my computer and the Qtopia shuts down within 2 or 3 seconds.

[siD]

Kuddel: Is /dev/input/uinput device exist? Maybe you must create it. mknod uinput c 10 223

[Kuddel]

Hi siD,
/dev/input/uinput exists.
I have not mentioned that, but when booting Qtopia succesfully by using boot_usb, it was not the same kernel. The kernel in the flex is an alternate version and the one I used for boot_usb was not. Does this make the difference?