HowTo:OpenMoko and Qtopia 4.3.0 Step-By-Step Installation Guide for A1200 and E6

[k4misiek]

I changed sdb1 to FAT16, untar files to sdb2 (ext2) and still is kernel panic;/

Hmm, I don't know . How You use ezx-boot and kernel?

It works fine with my E6 but colors on qtopia is break..
I know about patch but i don't try use it;]

[mspeedliver]

Can i install open moko in e6 with windows as i dnt hav a linux pc..

[k4misiek]

Can i install open moko in e6 with windows as i dnt hav a linux pc..

Try cygwin...
You don't need linux PC - just use live CD.

[triluu]

Hi!!!
I have been installed Qtopia 4.3.0 successfull on my E680 phone. !. It's great system !!
But that system can not find GMS services, so I can't call to orther phone.
I don't know that ploblem here. And when i reboot my phone, it is not boot from SD Card. I want boot from SD card, what i have to do ??

[gailisisdawsons]

Can I install openmoko on A1200r or C2 track...?

[sreenathsreenath]

I am trying to boot to ezx kernel using boot_usb on my a1200. I have tried different kernel images from wrym folder but no luck. I keep getting the following error :

sreenath@sreenath-laptop:~/Desktop$ sudo ./boot_usb /home/sreenath/Desktop/zImage-2.6.21-ezx11-a1200 1742
Serching for EZX phone: E2/A1200/E6/A910 found.
Sending mach id code 1742: 100% OK
Uploading kernel: 100% OK
Uploading params: FAILED: params upload failed

Help is appreciated. Thanks.

[m1k0]

my way

m1k0@laptok ~ $ ./boot_usb gen-blob 0
m1k0@laptok ~ $ ./boot_usb ~/Pobrane/zImage-200901091702 1743

details: http://wiki.openezx.org/Getting_Started

[wyrm]

@sreenath
update your boot_usb, and do as m1k0 said.

[sreenathsreenath]

Thanks guys. I finally saw the kernel boot. After the kernel boots, things go fine and then the screen just turns white and turns off. What could be the problem. could it be the root fs, i am using the gpe image. Please help.


root@sreenath-laptop:/home/sreenath/Desktop# ./boot_usb zImage-200901091702 1742
Serching for EZX phone: Generic Blob found.
Sending mach id code 1742: 100% OK
Uploading kernel: 100% OK
Uploading params: 100% OK
Calling the kernel...
DONE

[sreenathsreenath]

Is it possible to get GPE running on a1200, I have been trying hard. The kernel boots thanks to Wryms assistance but all i get is a white screen and nothing happens...