C5_AB with unicode + multi latin keyboard + multi GUI

[i.moto.freek]

Yeah, I think so.
In my opinion, when we fail to flash, the system will "lock something" that prevent us to flash again. So, we have to brought my phone to Motorola servioce center???

If this is the case, maybe there is a way to unlock it. Is there any way to ask someone from motorolla for help?

[admin]

try the Volume down, camera and on/off button. it brings you to the bootloader.

[i.moto.freek]

Thanks but we already gone through this procedure . Every time I enter boot mode and flash with a4p image , the flashing fails with the "Secure_Motorola_Flash" error.

Max/ Sandman , do you have anything to say about this matter?

[chiennk]

Good news to all E680i users around the world:

I have successful created the font that can display all languages in E680i!

Please help me to share this good news to:

1. All E680i friends in www.motorolafans.com forum
2. All E680i Vietnamese friends in vietnamese forum
3. All E680i Chinese friends in ccmove forum
4. All E680i Thailand friends in thai forum
5. All E680i Russian friends in russian forum

Motorola's font can display following languages:
Western
Japanese
Chinese_GB2312
Chinese_BIG5

ThreeSearch's unicode font can display following languages:
Western
Japanese
Chinese_GB2312
Chinese_BIG5
Hebrew
Arabic
Greek
Turkish
Baltic
Central European
Cyrillic
Thai
Vietnamese
International Phonetic Alphabet

With ThreeSearch's unicode font, all languages are now under one roof.

My font also supports International Phonetic Alphabet. http://www.arts.gla.ac.uk/ipa/ipa.html

Now you can install any dictionary with phonetic in your E680i!
Go to http://dictionarymid.sourceforge.net to download or setup your dictionary.

Motorola's font size is 1.8MB. ThreeSearch's unicode font size is 2.1MB. It exceeds the size limit of CG33. To keep the size of CG33 does not exceed 25MB, I have to move the following files to /diska/.system folder:

.GainTable.txt
vbr_dash.wav
vbr_dot.wav
vbr_normal.wav
vbr_dotdot.wav
vbr_pulse.wav
vbr_dotdash.wav

I attached these files in the zip file for your convenience. After using PST or Flashkit to flash this CG33 to your phone, remember to copy 7 files above to /diska/.system folder. If you forget to put 7 files in /diska/.system folder, you can not hear any sound from phone's speakers or your phone can not vibrate.

You can edit .GainTable.txt, ajust the volume of all speakers as you wish.
To do that, just copy .GainTable.txt to PC.
Use Notepad (don't use Wordpad) to edit it.
Save the changes and copy back to /diska/.system folder.
Restart the phone to apply the changes.

You can edit vibrate files to ajust the way your phone vibrates.
Use any sound editor to modify the wav files as you wish.
Save the changes and copy back to /diska/.system folder.

I also put the startup folder in /diska/.system. If you have any script need to be run when the phone starts such as Neo's startup.lin or startup_tone.sh, you can create a folder named "Startup" in /diska/.system folder and put those scripts there.


Steps to download this CG33 unicode:
1. Go to http://vllp.sourceforge.net
2. Select display language, then click on E680i Download section
3. If you use C5_A4 firmware then look for package "C5_A4_fullCG33_unicode", look for release "version 1.2", download file
ThreeSearch_C5_A4_unicode_chinese_phonetic_editable_gaintable_vibrate_startup_1.2.zip
4. If you use C5_AB firmware and your phone is E680 then look for package "C5_AB_modified_firmware", look for release "cg33_unicode", download file
ThreeSearch_C5_AB_patch_E680_unicode_chinese_phonetic_editable_gaintable_vibrate_startup_1.2.zip
5. If you use C5_AB firmware and your phone is E680i then look for package "C5_AB_modified_firmwares", look for release "cg33_unicode", download file
ThreeSearch_C5_AB_unicode_chinese_phonetic_editable_gaintable_vibrate_startup_1.2.zip

Steps to install this CG33 unicode:
1. After download and unzip you will have following files:
readme.txt
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware and your phone is E680)
.GainTable.txt
vbr_dash.wav
vbr_dot.wav
vbr_normal.wav
vbr_dotdot.wav
vbr_pulse.wav
vbr_dotdash.wav
test_multi_languages.txt

2. Use PST to flash:
Replace motorola origin smg with:
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
or
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
or
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware and your phone is E680)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware and your phone is E680)

during "Erasing flash memory" process.

Remember to use the same version of firmware full with these modified CG33.

3. Use Flashkit to flash:
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg to c5_a4_cg33.smg
or
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg to c5_ab_cg33.smg

flashcp -v c5_a4_cg33.smg /dev/mtd5
or
flashcp -v c5_ab_cg33.smg /dev/mtd5

Steps to be done after installation this CG33 unicode:
1. Create a folder named "Startup" in /diska/.system folder and put all startup scripts there.
2. Copy 7 files (.GainTable.txtvbr_dash.wav,vbr_dot.wav,vbr_normal.wav,vbr_dotdot.wav,vbr_pulse.wav,vbr_dotdash.wav) to /diska/.system folder. If you forget to put 7 files in /diska/.system folder, you can not hear any sound from phone's speakers or your phone can not vibrate.
3. Restart the phone

Steps to ajust the font size to make unicode font displaying nicer:
1. telnet to phone.
2. go to folder /ezxlocal/download/appwrite/setup
3. copy file ezx_system.cfg to PC
4. use ultraedit to edit file ezx_system.cfg on PC
5. Search for Large/Medium/SmallFontSize
6. Replace default size with Large=18/Medium=17/Small=16.
7. Save the changes
8. copy modified file ezx_system.cfg to phone at /ezxlocal/download/appwrite/setup.
9. Disconnect, restart the phone.
11. Choose setup, Text size = Medium
12. Your phone is now display unicode font nicer.


Testing this CG33 unicode:
1. Copy test_multi_languages.txt to your memory card
2. Tap on it and you can not believe what you will see: All languages are now in your hand!


You can also use this CG33 unicode with ThreeSearch's CG35 multi latin based keyboards.

ThreeSearch's CG35 multi latin based keyboards support keyin following languagues:
Deutsch (German)
English (UK, US)
Espanol (Spanish)
Francais (French)
Italiano (Italian)
Portugues (Portuguese)

To use multi latin based keyboards:
1. Tap on "au" to open multi latin base keyboards
2. Tap on "ab" to go back to normal keyboards

You can use Chinese keyboard/handwriting to keyin/write Chinese characters together with all latin based characters!


I hope you enjoy my modified CG33 and CG35.

08 - December - 2005

ThreeSearch



Let no one deceive another
or despise anyone anywhere,
or through anger or irritation
wish for another to suffer.

[grovik]

Hi,
can you done Unicode and latin for A780??

[chiennk]

ThreeSearch's CG33 unicode version 1.3 change log:

1. include all the changes of CG33 unicode version 1.2 (support Vietnamese, Thai, Chinese, Greek, Phonetic...editable gaintable, vibrate, startup)

2. I merged yantz's rootfs with this cg33, this cg33 included auto telnet when usb cable plugged in (acmattach.txt), silivo's bash2, nano...

3. For some reasons, silivo's bash2 didn't work with XSnes9x. So I keep motorola's bash as default bash to make XSnes9x work, and add silivo's bash2 as /bin/bash2.

To make use of bash2 and keep XSnes9x work, I modified file .profile in /root folder to active bash2 on top of default bash. when you telnet, you still enable to see dircolors and path prompt. when you exit, you need to exit 2 times. first time exit from bash2, second time exit from default bash. bash2 apply to root only when you telnet, so XSnes9x still works with default motorola bash.


4. I also modified acm_fd.agent to auto backup native database (addressbook + sms) to memory card when usb cable plugged in. The phone will backup native database to /mmc/mmca1/.system/backup/sysDatabase folder. If this folder does not exist, it will be created automatically. You can use restore-native.lin to restore native database from memory card later on.

5. Fix contact issue in c5_ab firmware:
In folder /usr/setup, there is a file ezx_flexbit.cfg
[SYS_FLEX_TABLE]
0 = 1208211392
1 = 374437888
2 = 2178351491
3 = 1678589
4 = 4289465088
5 = 195198976

if we change sys_flex_table's 4 = 4289661696, 5 = 731906048 instead of 4 = 4289465088, 5 = 195198976:
[SYS_FLEX_TABLE]
0 = 1208211392
1 = 374437888
2 = 2178351491
3 = 1678589
4 = 4289661696
5 = 731906048

We will able to fix c5_ab contact issue. For your convenience, I also included E680i's c5_ab_cg36 and E680's c5_ab_cg36 with this release.

I guess other value of sys_flex_table (1,2,3...) has meaning, but only Motorola China know how to modify it as they are author of E680i firmware.

Steps to download this CG33 unicode:
1. Go to http://vllp.sourceforge.net
2. Select display language, then click on E680i Download section
3. If you use C5_A4 firmware then look for package "C5_A4_fullCG33_unicode", look for release "version 1.3", download file
ThreeSearch_C5_A4_unicode_chinese_phonetic_editable_gaintable_vibrate_startup_acmattach_bash2_backupnative_1.3.zip
4. If you use C5_AB firmware and your phone is E680 then look for package "C5_AB_modified_firmware", look for release "cg33_unicode", download file
ThreeSearch_C5_AB_patch_E680_unicode_chinese_phonetic_editable_gaintable_vibrate_startup_acmattach_bash2_backupnative_1.3.zip
5. If you use C5_AB firmware and your phone is E680i then look for package "C5_AB_modified_firmwares", look for release "cg33_unicode", download file
ThreeSearch_C5_AB_unicode_chinese_phonetic_editable_gaintable_vibrate_startup_acmattach_bash2_backupnative_1.3.zip

Steps to install this CG33 unicode:
1. After download and unzip you will have following files:
readme.txt
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware)
.GainTable.txt
vbr_dash.wav
vbr_dot.wav
vbr_normal.wav
vbr_dotdot.wav
vbr_pulse.wav
vbr_dotdash.wav
test_multi_languages.txt --> open this file to test unicode
bins.mtf --> this file contain silivo's bash2, nano...
acmattach.txt --> auto telnet when usb cable plugged in
restore-native.lin --> this file to restore native database

2. Use PST to flash:
Replace motorola origin smg with:
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
or
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware)

during "Erasing flash memory" process.

3. Use Flashkit to flash:
rename E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg to c5a4_cg33.smg
or
rename E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg to c5ab_cg33.smg
rename E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg to c5ab_cg36.smg

flashcp -v c5a4_cg33.smg /dev/mtd5
or
flashcp -v c5ab_cg33.smg /dev/mtd5
flashcp -v c5ab_cg36.smg /dev/mtd6

Steps to be done after installation this CG33 unicode:
1. Create a folder named "Startup" in /diska/.system folder and put all startup scripts there.
2. Copy 7 files (.GainTable.txtvbr_dash.wav,vbr_dot.wav,vbr_normal.wav,vbr_dotdot.wav,vbr_pulse.wav,vbr_dotdash.wav) to /diska/.system folder. If you forget to put 7 files in /diska/.system folder, you can not hear any sound from phone's speakers or your phone can not vibrate.
3. Copy acmattach.txt to root directory of the phone (/diska/acmattach.txt). Your phone will switch to telnet mode automatic when usb cable plugged in. You rename file acmattach.txt in /diska folder to enable or disable this feature.
4. Copy bins.mtf to root directory of the phone (/diska/bins.mtf). Tap on this file, the phone will create two folder "bin" and "lib" in /diska/.system. The bin folder contains bash2, nano..., the lib folder contains share libraries.
5. copy restore-native.lin to memory card. You can put this file in any folder of memory card. When you want to restore native database, tap on it.
6. Restart the phone

Steps to ajust the font size to make unicode font displaying nicer:
1. telnet to phone.
2. go to folder /ezxlocal/download/appwrite/setup
3. copy file ezx_system.cfg to PC
4. use ultraedit to edit file ezx_system.cfg on PC
5. Search for Large/Medium/SmallFontSize
6. Replace default size with Large=18/Medium=17/Small=16.
7. Save the changes
8. copy modified file ezx_system.cfg to phone at /ezxlocal/download/appwrite/setup.
9. Disconnect, restart the phone.
11. Choose setup, Text size = Medium
12. Your phone is now display unicode font nicer.


You can also use this CG33 unicode with ThreeSearch's CG35 multi latin based keyboards.

ThreeSearch's CG35 multi latin based keyboards support keyin following languagues:
Deutsch (German)
English (UK, US)
Espanol (Spanish)
Francais (French)
Italiano (Italian)
Portugues (Portuguese)

To use multi latin based keyboards:
1. Tap on "au" to open multi latin base keyboards
2. Tap on "ab" to go back to normal keyboards

You can use Chinese keyboard/handwriting to keyin/write Chinese characters together with all latin based characters!


04 - Jan - 2006

ThreeSearch



Train yourself in doing good
that lasts and brings happiness.
Cultivate generosity, the life of peace,
and a mind of boundless love.

[akhaliq]

WOW....

i cant say anything else. let me try but whatever u did is the real thing that i needed.
LUV ya dear for your work...

[akhaliq]

i tried, and i liked it.

i plan to keep it. but i think it could be much KOOL if a /root directory and a .profile could be added in this CG33(as yantz did in rootfs). i liked the way he used bash2 as default shell, /diska/.system/bin included in path, and enabling dircolors. i really loved that.

may be this can b considered for next release.

thanx, now i have a good CG33 made for ABP. previously i was using rootfs with ABP(which was originally for A4P).

[arzme]

yo chiennk,

i already flash the phone wth the latest cg36. so right now, the new cg35 ver1.3 comes wth cg36, so do i need to flash tht cg36 again?

[akhaliq]

No Arzme, you dont need to update CG36. it will work fine. just use flashkit to update CG33 1.3.

i have already tested. but even if it does not work for you, u can use flashkit to update CG36 again(i think it didnt took more than 10 minutes). but again, i m sure that there is no need to update CG36 again.