Urgent help needed !! E6 dead while flashing

[kundancool]

I made my E6 dead while I was flashing my phone just now I used a script which had some address mistakes which caused it to flash it wrong

and now My E6 is dead can't boot neither I can see the boot screen

I used moto-boot-usb tool and gen-blob for flashing as I do regularly but this time due to address problem

I think the Bootloader area has been flashed by mistake and now I have to repair my phone .....

Please need urgent help Please help me guys.....

no Idea how to recover Bootloader I am DEAD as my ROKR E6

HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP! HELP!


BAD NEWS

SERVICE CENTER IS NOT GIVING ME WARRANTY AS THE INDICATOR PAPER COLOR HAS CHANGED WHICH SHOWS THAT LIQUID HAS EFFECTED THE PHONE
SO THEY WILL CHARGE ME 80% OF UNIT COST + 500 = 4100

SO I AM NOW SEARCHING FOR A GOOD SOLUTION TO THIS PROBLEM

[BruceLee]

As i already suggested: testpoint

[kundancool]

As i already suggested: testpoint

I don't think that will help as without boot-loader test-point will not work .... (I think so...)

as it is not powering on at all completely dead no reaction at all even if I try to switch on, charge, switch to flash mode
nothing happens at all

[kundancool]

Bad news

service center is not giving me warranty as the indicator paper color has changed which shows that liquid has effected the phone
so they will charge me 80% of unit cost + 500 = 4100

so i am now searching for a good solution to this problem

[santhoshk]

Bad news

service center is not giving me warranty as the indicator paper color has changed which shows that liquid has effected the phone
so they will charge me 80% of unit cost + 500 = 4100

so i am now searching for a good solution to this problem

..where do you stay?

[vigneshraj]

Hmm, kundalcool ...
Very sad to hear it
But dont worry,
there wil be a solution which cn be solved urself ...
Try try try until u succeed ...

[Hendz]

wuhhh... so sad to hear that .... but well i think it's just like what BruceLee said up above that it seems to need a TESTPOINT as a very first step defacing a hardware problem by your case.

the TP itself is, intended to ZAP (reset or make it blank) all previous hardware configs inside the FLASH-ROM chip so it's gonna refreshed for awhile, and, waiting for next action i.e. "injecting" a very new BOOTLOADER. during that phase the phone will be "died", it's not completely dead at all though... then, once the new BL injected with its own proper version, your phone is come back to Earth and living the 2nd life
that way, you can continue flashing like before with new BL comin up to the screen as red-colored like before.
how to do TP-ing the phone is quite simple, i.e. you need to disassemble it at first and get an E6e-TP-Picture and a program to clearup the BL and reinsert it back.
remember that those are just what I experienced on ma two-kinds of P2K-based phone, the SLVR L7 and SLVR L7e that both died by mistake on the BL area.... so i hope, and i'm pretty sure, it's worked quite similar too with E6e even A1200

now... this is the picture and some steps I took from a friend of my, during the TP against E6e with R533_G Stock FW Version. -- you can try this at home by yorself:
the phone is ready now, and after that, you must continue by injecting BootLoader with the Original Version like it was.

SADLY i just dont even know what exactly the Program used to do injecting the BOOTLOADER back like that... is it something the same just as the P2K-phones anyway??? If so, you can use the last version of "P2K-Tools" ....... but if it is not, maybe some of fans here can assist us to explain it moreover please ...................................................

ANYWAY......
GO FOR IT BRO KUNDAN.... I KNOW U CAN.... COME ON, COME ON, GIVE IT A LIFE BACK!!!!!!

[kundancool]

Hendz
Thanks for all the info but I know these things from very long time but I don't know the software that can help me flash Bootloader to phone same as you don't know
and but now I will try this with RSD lite may be life gives me a second chance
I just pray to god this works with RSD Lite

THANKS ALOT HENDZ FOR YOUR WARM SUPPORT

[Hendz]

what about it now? - any progress bro?
i think RSD Lite can'T recognize it yet unless the phone has already a Bootloader, just like any other phones should be

[kundancool]

what about it now? - any progress bro?
i think RSD Lite can'T recognize it yet unless the phone has already a Bootloader, just like any other phones should be

sstill dead waiting for buddies to send a second hand board to me so that I can make it alive once again....

and yes there is no method to flash a phone without a bootloader the only option is JTAG (as said by few people) as Motorola is the only one knowing how to flash E6 with JTAG so no hope with JTAG