I want PC internet sharing via Bluetooth

[killerbender]

and what about sharing internet over bluetooth on Windows Vista?
Using the Widcomm drivers, because bluesolei software cause BSOD

[justice33]

as long as you can connect your E6 to vista via bluetooth...i'm downgraded to winxp from win7 due to some stability prob so can't make guide for..later i will try this guide to in my new A1200 firmware..

if you in a hurry...try to do some tricking...you'll figure it out how to manage it on vista...actually it's quite the same...bluesoil or widcomm...nothing matters..it's the settings...dude...

[killerbender]

as long as you can connect your E6 to vista via bluetooth...i'm downgraded to winxp from win7 due to some stability prob so can't make guide for..later i will try this guide to in my new A1200 firmware..

if you in a hurry...try to do some tricking...you'll figure it out how to manage it on vista...actually it's quite the same...bluesoil or widcomm...nothing matters..it's the settings...dude...

Shure is quite the same thing, but I cant figure how to make a bluetooth PPP conection to enable internet sharing. I've read other guides and some use Bluetooth PAN to share internet. If someone has done please post it!

[shrey_somani]

the steps which u gave for bluetooth internet..i followed same but i m not able to connect..
pls if u could help with using screen shots.

r u using or have u tried it...
as i m not able to connect..

[Misbah]

I want PC internet sharing via Bluetooth.Plz someone give me the full information about the procedure to run pc internet via bluetooth on e6 with required app links.
Thanx in advance Brothers.

Simple Guide to use PCinternet
1.install ccproxy on the pc
2. install nguang_enet2.0.1.zip (thanx to neonicus)
http://www.motorolafans.com/forums/a..._enet2.0.1.zip
3. run Enet from E6. it will ask the address of computer give 192.168.16.1, than save
4. chose the medium BlueTooth or USB
5. open ur browser n surf
6 ur r done
enjoy
thanks to original developer n ofcourse me

[shrey_somani]

hey i tried ur technique..it is working for USB but not for Bluetooth..
anything u missed out..
as it says timed out..you must connect within 30 seconds...
what to do..how to connect...pls reply..

Simple Guide to use PCinternet
1.install ccproxy on the pc
2. install nguang_enet2.0.1.zip (thanx to neonicus)
http://www.motorolafans.com/forums/a..._enet2.0.1.zip
3. run Enet from E6. it will ask the address of computer give 192.168.16.1, than save
4. chose the medium BlueTooth or USB
5. open ur browser n surf
6 ur r done
enjoy
thanks to original developer n ofcourse me

[Halftux]

You dont need a proxy.
When you want to use ppp connection have a look here for the steps.

http://www.motorolafans.com/forums/a...tml#post209967

When you want to use a pan connection make sure that you allow the local network service from bluetooth to use the lan and internet.

[shrey_somani]

Halffux i m not using PPP conection..
i do internet using Wifi in laptop and want to share internet in my e6 via bluetooth..but i tried ur mothod but was not successful..dont know what is the problem..
i m able to do net by using cable but not by using bluetooth..
i think i m not able to connect my mobile with bluetooth LAN..

[Halftux]

Halffux i m not using PPP conection..
i do internet using Wifi in laptop and want to share internet in my e6 via bluetooth..

The connection between your pc and phone is a point-to-point (ppp) connection with rfcomm. I think this is needed with enet. Check with ipconfig if you have a ppp connection and try to ping your phone and from phone your pc.

as it says timed out..you must connect within 30 seconds...
what to do..how to connect.

To execute these both steps you need to be very fast. If the message appears look for the serial port if its still connected?

3. Connect a1200 serial port accept with ok on phone

4. Use the direct link network connection from step D. This is the ppp connection.

i think i m not able to connect my mobile with bluetooth LAN..

Bluetooth LAN is a PAN connection personal area network. Therefore you need to use bluepand.pkg or install bluez on your phone.

[shrey_somani]

when i install modem using my port 9 which is my serial port for Bluetooth it says unable to install modem..
what to do now..