ALL Flash DRIVERS needed!

[smoke]

Hey fellas

yest i tried flasshin for the first time, my first firmware was .08P then it was updated to .10P from Motorola care centre.

.10P doesnt support MPKG, so i thought of flashin my fone with working mans firmware

i need all the drivers that are required for FLASHING

i searched down the forum but cudn't manage to get the rite one, plz gimme the links to the drivers.

When i tried flashin it was ok until it asked for some more drivers i had no clue what to do!

What are P2k drivers? UsbNet drivers?? plz gimme the links soon its urgent....

thanz in advance...

[mspeedliver]

Hey fellas

yest i tried flasshin for the first time, my first firmware was .08P then it was updated to .10P from Motorola care centre.

.10P doesnt support MPKG, so i thought of flashin my fone with working mans firmware

i need all the drivers that are required for FLASHING

i searched down the forum but cudn't manage to get the rite one, plz gimme the links to the drivers.

When i tried flashin it was ok until it asked for some more drivers i had no clue what to do!

What are P2k drivers? UsbNet drivers?? plz gimme the links soon its urgent....

thanz in advance...

Motorola Drivrs: Download Here- MOTODEV > Documentation & Tools > USB Drivers for Motorola Products > Handset USB Driver for Windows

RSD Lite: Download here- http://www.motorolafans.com/forums/e...load-here.html

Working man's firmware: Download Here- http://www.motorolafans.com/forums/e...orkingman.html

Regards,
Mrinal

[shantanu]

if u want to flash ur phone then u have to flash with rsdlite ver.4.2 which u will get in firmware section

[smoke]

if u want to flash ur phone then u have to flash with rsdlite ver.4.2 which u will get in firmware section

But i read that RSD lite's higher versions have bugs n v shud flas vit ver 3.4???

[mspeedliver]

But i read that RSD lite's higher versions have bugs n v shud flas vit ver 3.4???

I flashed with 4.2 version and it flashed fine... U can use this version of RSD Lite...

[smoke]

Motorola Drivrs: Download Here- MOTODEV > Documentation & Tools > USB Drivers for Motorola Products > Handset USB Driver for Windows

RSD Lite: Download here- http://www.motorolafans.com/forums/e...load-here.html

Working man's firmware: Download Here- http://www.motorolafans.com/forums/e...orkingman.html

Regards,
Mrinal

hey budi thanz for the links

can u temme one thinG?
i tried flashin my E6 with RSD lite Ver 3.5 and some time it went ok like
the RSD lite show in progress n somehin got executed but later it asked for DRIVERS Which i dunno!?
i had installed the motorola drivers b4 flashin on my PC, but then y is it askin for drivers now!??!?????

plzz rply soooooooonn...

[motomaster]

hey budi thanz for the links

can u temme one thinG?
i tried flashin my E6 with RSD lite Ver 3.5 and some time it went ok like
the RSD lite show in progress n somehin got executed but later it asked for DRIVERS Which i dunno!?
i had installed the motorola drivers b4 flashin on my PC, but then y is it askin for drivers now!??!?????

plzz rply soooooooonn...

Uninstall all present drivers you have installed at the start of thread and all the versions of RSD lite from your pc.Do this by starting pc in safe mode.

Restart normally.

Now follow these procedures.

>Download the necessary drivers from here and install them.

http://www.motorolafans.com/forums/a...ver-v3.7.0.zip

Credits: Dellsonic

>Restart.

>Install this after installing the drivers:

http://www.motorolafans.com/forums/a...ite-v4.4.1.zip

>Restart.

>After this start RSD lite and start flashing.

If flashing fails with above version of RSD lite use this , I use the same:

RapidShare: Easy Filehosting

Contact me for any assistance whatsoever.

Regards,
Motomaster™

[smoke]

Uninstall all present drivers you have installed at the start of thread and all the versions of RSD lite from your pc.Do this by starting pc in safe mode.

Restart normally.

Now follow these procedures.

>Download the necessary drivers from here and install them.

http://www.motorolafans.com/forums/a...ver-v3.7.0.zip

Credits: Dellsonic

>Restart.

>Install this after installing the drivers:

http://www.motorolafans.com/forums/a...ite-v4.4.1.zip

>Restart.

>After this start RSD lite and start flashing.

If flashing fails with above version of RSD lite use this , I use the same:

RapidShare: Easy Filehosting

Contact me for any assistance whatsoever.

Regards,
Motomaster™

thanx a ton buddy!!
shall give it a try now n tell u..

[smoke]

dude temme one thing more
those drivers link vich u posted are enough to flash wit new firmware or do i need some more drivers

plz help!
coz .10P sux!

[smoke]

guyz this is the guide for flashing the firmware:

How to Flash your Phone

All the files mentioned can be obtained from the Downloads section

Click here to download the following files.

1. Download the file Motorola_USB_Driver_32_v2.7.6 to your PC and unrar it to your desktop so you can easily find it.

2. Install a program called "RSDLite" on your PC. To Download RSD lite Click thread for the file. For trouble free installation, if you are running Windows XP, you should have Service Pack 2 installed.

3. Download the firmware file that you want to flash to and unrar it to your desktop.

4. Start up RSDLite on your PC. You may be asked to install a number of drivers (5 or 6) to your PC. Point it in the direction to the motpcsdrivers folder you unrared.

5. Put the phone in Bootloader Mode - MBM mode by turning on phone while also holding down the Camera Button and the On/off button (These need to be all be held down together). The phone should start up with a red screen and say its in MBM mode.

6. Plug phone in using usb cable.

7. RSDLite should list the phone (this may take a minute or so. If it does not close down RSDLite and restart it). Start the flash process, by clicking the button on the top with the ”…” and select the firmware file to install then click “Start”. The process will take several minutes so be patient, the screen on you phone will turn off, but RSDLite will still show progress.

8. When the "Found New Hardware" screen pops up, select “NO” for “Can Windows connect to Windows Update?” then select “Y” for “Install Software from a specific location” and point it to the motpcsdrivers folder you unrared. Once the driver has installed, click on “Finish” on the “Found New Hardware wizard” to continue the process.

9. You will need to install quite a few drivers – so just keep repeating. It may ask you to manually restart the phone – if so, unplug the cable from PC, remove the battery for 5 seconds (make sure unplugged first!), put battery back in then turn phone back on.

10. Once its fully on, go to Setup --> USB Mode and change mode from "Mass Storage" to "Modem".

11. Plug phone back into the PC using the cable. RSDLite should say "complete" or “PASS”

12. Unplug the phone again, turn it off and on. All should be complete.

You can now restore all your contacts, calendar and tasks back to your phone using MPT. (Be sure to remove the SIM card before doing this as the recovery function from MPT deletes any contact on SIM for some reason!)


8. What to Do if Problems

If you have any problems then don’t panic – the best thing is to close RSDLite, unplug the phone, take out the battery, replace then try again from the start.

1. If you get any of the following error messages that have been reported by users, then it appears most have been resolved by starting the flash process from the start:
- The "secure_motorola_flash" interface could not be found the super-file is secure and for re-flash, the phone needs a super-file that is not secure and for reflash. (0x7066)
- “flashing couldn't be complete because of licensed data”
- “error jumping to RAM downloader”
- a red line across their battery after flashing

2. Try a different USB port – a lot of users have stated that changing the USB port they have their phone plugged into helps, this is most likely because windows will reinstall all the drivers.

3. Try a different version of RSD Lite.

4. Make sure you put your phone in to USB MODEM MODE before plugging it back in. If you do not do this your system will not install all the devices correctly.

5. Try a different version of the firmware.


Problem: Phone can not read SIM card or has no signal after flashing

Some users experienced problems with the phone reading the SIM card or not getting a signal after flashing (ie it searches and finds nothing). If this happens to you then try the following:

1. Tap on status bar in home screen. Switch off antenna tap ok on the bottom. Then switch on antenna again. (You may need to repeat this a couple of times)

2. If that doesn't work, change the network band [dial pad-->menu button (at bottom left)-->setup--> network setup--> menu button--> search setup--> After that close all those things and you should have service again. Once you get your service back, repeat the steps and put it on automatic again.

For more information, refer to this thread .

==============================================================================================

All of the information presented in this write-up was obtained from user's postings from the various threads on this forum. A best effort was made to ensure it is complete and accurate including performing all of the steps presented on my own phone - but there are no guarantees there are not errors!!

This Guide took many hours to research and put together. If you found the information useful, perhaps you would consider donating a few dollars to keep the Motorolafans site funded as it costs $60 each month in hosting fees. See the announcement at the top of the E6 forum for details on how to do this.

Good Luck

~Alpha~
======================================================


In this i din get the 8th Step!!
plz help motomaster!!