Using Pc's internet connection on my rokr e6

[abhirooplive]

I am very happy with the forum members here..as they have helped me everytime...however I come to you all again...

I need to use my pc's broadband connection in my rokr e6

I saw 1 thread about it...but cannot find it now..plz help me..if you can...any help will be appreciated...thanks

[TEPEM]

this is what you're looking for

if in trouble and need assistance feel free to ask here - I have it working.

hope that helps.

[laibaobao]

Share the Internet

[abhirooplive]

Share the Internet

thanks laibaobao...but the pkg software is entirely in chinese..so I cannot understand a thing...
Can anyone translate this in english..That would be much of help

[abhirooplive]

this is what you're looking for

if in trouble and need assistance feel free to ask here - I have it working.

hope that helps.

hello tepem..but I am stuck at the step 2 of the link you gave...
I mean I have telneted into my e6..I also had busybox installed in my e6 ...what to do next..could not understand the next step..plz help

[laibaobao]

Sorry，I'm come from China,my English is bad.I use the Google translation

[TEPEM]

hi abhirooplive,

ok, let's start from the very beginning

1) copy busybox file from [busybox] folder from your [.system] (or whatever folder you store it) to the root of SD card
2) connect the phone in USB-lan mode
3) telnet to your phone from the PC (most probably telnet 192.168.16.2)
4) when telneted successfully type cd mmc [Enter]
cd mmca1 [Enter]
5) type the following command route add default gw 192.168.16.1 [Enter] (192.168.16.1 should be the real IP of you PC - you can check it from the command line running ipconfig -all)
6) you need to point the phone to the DNS it is going to use: in telnet type cp /etc/resolv.conf /mmc/mmca1/ [Enter]
now you should have a file resolv.conf stored in the root of your SD card.
7) now exit the telnet and switch phone to mass storage mode
8 ) copy resolv.conf to your PC
9) download application Notepad++ from here
10) install Notepad++ to your PC
11) open file resolv.conf with Notepad++ and change value 127.0.0.1 stored in this file to the actual IP of you comp (e.g. 192.168.16.1) and save changes to this file
12) copy resolv.conf back to the root of your SD card
13) switch phone into USB-lan mode
14) telnet to your phone again
15) you need to mount the file into phone's system: type mount --bind /mmc/mmca1/resolv.conf /etc/resolv.conf
16) in the phone: create new Internet Connection with any name, with any APN, with no username and no password but with [Primary gateway IP]=IP of your PC (e.g. 192.168.16.1) and [Port]=6588
17) download application AnalogX Proxy from here
18 ) install it to your PC and run it (no need to configure anything)
19) run FakeDSM app on your phone
20) activate the connection you created in step 16
21) run Opera Mini (mine is v. 4.1.11.355 20080522) - it should work
one more thing - in Opera Mini check that setup [Network] is set to <HTTP>
please also mind that all this works until you reboot the phone.
I haven't tested this method with native browser, but I can tell I'm 100% sure Jimm is not working with this - I tested it .
Let me know if you need further help.
And get back with your story how you succeed!
Good luck!

[sagar420]

sorry TEPEM can't get u please explain it more clearly i installed enet and busybox was already installed..then i opened sharenet choose start then data line then it says put ur gate way ip: then i wrote it and save it then i quit the app..then it says broadband connected somthin like that...then what ?...plz reply

[glevin]

@tepem i followed your instructions but when i type this command ./busybox route add default gw 192.168.16.1 [enter]
it says busybox applt not found... i copied the busy box in the root of my sd and i check dir it shows the contents but why not found? need help here... pllsss?

[TEPEM]

hi glevin, I have discovered a mistake - please refer to the scenario above again (I marked step numbers that I've amended in red bold) - sorry for that - now it should hit the spot.

hi sagar420,
the only applications you need to do this (except for Opera mini which I believe you already have) you can find linked to my scenario - so I advise carefully following it (my scenario) step-by-step (making sure you use the EXACT applications I mention and provide links to - otherwise you should be 100 percent sure what you're doing and apparently don't need my manual )
I can't quite get what you mean - maybe try putting my steps you experienced problems with; followed by your comment (try to be short, exact and comprehensible) about the details of an error.
If still in trouble please let me know.
Good luck!