[INFO] Seem Editing Discussion for A1200 and linux based phones

[Archangel676]

pretty interesting.. been thinking of getting a a1200 looks like the seem editing guide is relatively easy to follow.. just one thing in one of the screenshots where you have XVI32 when you change the setting in the bitmanipulation.. where is the new code that you copy from before you get ready to paste it back in radiocomm?

also anyone come up with a current hack guide of seem editing or mods that have been or can be done for the a1200?

[ph03n1x]

cant get the past the 7th step, when i press the buttom, it failes to send and it glows red not green....help please

ok i had same problems make sure first you see usb tc in toolbar then make sure when you get to gsm2 tab element id should be 0032 and record # is 1 then click rdelem

[EvilGnome]

Does anyone know of any operations such as seem editing or firmware flashing that I can do only using my linux box? If so, where can I look for more information? I do live with some people who run windows, but I'd rather not bother them with my crazy phone games, if that's a possibility.

Thank you in advance for your response(s).

[chenghs]

Several questions I have:
At step 2, my A1200 doesn't have "usb net" selection
At Step 3, I select GSM and mlink usb lan driver

My computer did connect the A1200. But radiocomm just couldnt' find it. The strange thing is the red UBS icon on the low right hand side turned to Blue and then to red again once I connect my cell to computer. Anyone can help on HOW I CAN CONNECT MY A1200 USING RADIOCOMM?
Thanks a lot in advance,

[chenghs]

Several questions I have
At step 2, my A1200 doesn't have "usb net" selection
At Step 3, I select GSM and mlink usb lan driver

My computer did connect the A1200. But radiocomm just couldnt' find it. The strange thing is the red UBS icon on the low right hand side turned to Blue and then to red again once I connect my cell to computer. Anyone can help on HOW I CAN CONNECT MY A1200 USING RADIOCOMM?
Thanks a lot in advance,

BTW, my A1200 has 53 CMCC firmware. The setup is USB Modem. Anyone can help?

[Shigeru]

What Radiocomm is used for ??

[chenghs]

What Radiocomm is used for ??

It's a software, installed on computer, that can be used to communicate and manipulate A1200. Looks it's the only way you can edit the SEEM to get rid of "blank voicemail message" problem.

[andre2you]

Several questions I have:
At step 2, my A1200 doesn't have "usb net" selection
At Step 3, I select GSM and mlink usb lan driver

My computer did connect the A1200. But radiocomm just couldnt' find it. The strange thing is the red UBS icon on the low right hand side turned to Blue and then to red again once I connect my cell to computer. Anyone can help on HOW I CAN CONNECT MY A1200 USING RADIOCOMM?
Thanks a lot in advance,

Try this:
Connect your A1200 to the USB connector with the A1200 powered on
Turn the A1200 off (leaving it connected)
Turn the A1200 on (you may need to repeat this a few times)
It should now find the A1200 (if not not you may need to uninstall all the morotola drivers reboot your pc and then reinstall the drivers and start at the top)

This is what worked for me.

[MotoMINGA1200]

Hello everyone,

When installing the radiocomm, if you have antivirus installed, did anyone notice your antivirus scanning an email send?

[Alpha43]

Never happened to me.. What email client do you use?
~Alpha~