INFO: Seem edit A1200 is possible thru Radiocom 10.3.1

[Robikonobi]

How do I tell if the auto time update thing is working? I tried manually advancing my time by 10 mins and then turning the phone on and off to see if the time readjusts itself, but it doesn't seem to be readjusting itself=(

In any case, you've been very helpful in guiding me through this, so thanks again for all your help, CV144!

[cv144]

How do I tell if the auto time update thing is working? I tried manually advancing my time by 10 mins and then turning the phone on and off to see if the time readjusts itself, but it doesn't seem to be readjusting itself=(

In any case, you've been very helpful in guiding me through this, so thanks again for all your help, CV144!

On the main menu where setup is located, you will found time click on that, it will display local city, look at the bottom left hand corner and click on it, it will display network time and setup, if you click on network time it will give you the option to do the automatic network time.

[V.Razr.X]

Keep up the good work guys...Keep the developments coming. Im going to make this a sticky.

[kruejl]

When I tried to use the Radiocomm software, it just sits on the opening screen after I choose GSM and USB....any ideas?

[cv144]

When I tried to use the Radiocomm software, it just sits on the opening screen after I choose GSM and USB....any ideas?

Did you notice a red icon show up on your task bar that mark "USB"? Are you using radiocom 10.3.1?

[Robikonobi]

UPDATED: The auto adjust time thing appears to work. When i turn on the automatic network thing as you instructed, my time gets adjusted to the correct time...and automatically readjusts every few minutes!

I guess the only question is...would this work if we had not updated the seem file...i never noticed this setting until you mentioned it....I'll do more testing tomorrow.

[Sanin]

Can anyone tell me what radiocom is exactly ?

[cv144]

I just found a way to directly edit the seem with Radiocom:

1. In the Element ID:0032
2. Record #:0001
3. Offset:normal seem map offset # Mulitiply by 2 in hex, (you can do this with windows calculator, set that to scientific.)
i.e. 89 in hex x2 =112
4. Lengh:0002
5. click on RDELEM
6. get whatever is display in Data (Hex only) Block
7. open xvi32 and create a new document and input what you read in step 6, and do a bit manipulation.
7. input the result into Data (hex only) block
8. click STELEM
and your done.

[cv144]

Can anyone tell me what radiocom is exactly ?

It's Motorola's own phone service software, use with care!

[whazzzup]

What I see.....the A1200 EDGE compatible
But is it working or not with you guy's?