i bricked my ming

[aditya584]

hi all,
earlier i had 0.12p fw.
first i flashed to white ming.it was ok except for some flaws.
so i then flashed to bints 0.53plus(i know its not allowed but somehow i didnt follow the instructions)
now my ming is bricked.
it doesnt startup.
it starts only when i plug it into the charger n it shows a red line across battery with the upper menu not working.
i cant connect to mbm mode(i actually did it by plugging on usb cable and pressing the joystick,vr and red button) but i cannot flash it again using rsd lite.
it says flash failed with some error.

can someone post the link to step by step procedure to unbrick it plz coz i m not able to find it newhere....

thanx in advance

[nodramachicks]

hi all,
earlier i had 0.12p fw.
first i flashed to white ming.it was ok except for some flaws.
so i then flashed to bints 0.53plus(i know its not allowed but somehow i didnt follow the instructions)
now my ming is bricked.
it doesnt startup.
it starts only when i plug it into the charger n it shows a red line across battery with the upper menu not working.
i cant connect to mbm mode(i actually did it by plugging on usb cable and pressing the joystick,vr and red button) but i cannot flash it again using rsd lite.
it says flash failed with some error.

can someone post the link to step by step procedure to unbrick it plz coz i m not able to find it newhere....

thanx in advance

you flashed FROM C2 BACK to H2 (which you shouldn't have and the guide mentions that), what FW did you try to flash to from there? the guide says that you need to put your phone into MBM mode b4 flashing, but i've found that if you start RSDlite and then plug your phone in, it automatically puts it into mbm mode when you start the flash. so if you CAN get into MBM, just start the flash in RSDlite (i recommend 3.. if not you can try following the instructions in the guide and flashing with radiocomm

[aditya584]

yes i know i made a mistake by flashing from c2 to h2 but whats done is done.
i cant start my phone anyhow now..the only way it starts is by putting it into charger.

from white ming i went to bints 0.53 plus with 3

luckily i was able to go to MBM mode once. there i tried the 0.53 p one once again but after processing image,it said flash failed....

i just want to ensure my phone is ok

[nodramachicks]

if you can GET your ming to MBM mode, try flashing with amins extreme elite FW, it's a full flash and might fix yuour issue

[aditya584]

more bad news for me,
i took the phone to service centre.they tried two softwares but in both ,they got a red line across the battery and the upper menu not working just like what i had.
now they tell that i have to give the phone to the company coz it might have some hardware problems and will cost me abt 3000 Rs.
plz plz plz plz
i request others also to help me on this..
even yesterday i tried flashing to white ming again as my phone luckily started in MBM mode(i dont know how) but it was a fail(error downloading RAM downloader)

[rachit2588]

i think you should try with radiocomm..........i havent yet tried that but someone can give you more details bout flashing with radiocomm...

else
try standard RSD lite and flash on amin's EE c2
try about 3 times if you get a ram download failure
restart your PC....reinstall RSD lite....restart your pc...change your USB port to other one....install the DRIVERS again when RSD lite asks for it....i hope that works...
do reply...to this post...

[PaulF]

yes i know i made a mistake by flashing from c2 to h2 but whats done is done.
i cant start my phone anyhow now..the only way it starts is by putting it into charger.

The charger symptom doesn't sound like flashing problem to me. You may just have a coincidence and the battery died when you flashed. Can you try charging the battery for a few hours?

[aditya584]

thanx guys i vl for sure give it a try and tell u the result.
but my foremost pblm is getting to MBM mode.
i tried all options mentioned here.
can u plz tell me a sureshot way to gret to it.
if MBM mode works then i can for sure try all these options

[gailisisdawsons]

thanx guys i vl for sure give it a try and tell u the result.
but my foremost pblm is getting to MBM mode.
i tried all options mentioned here.
can u plz tell me a sureshot way to gret to it.
if MBM mode works then i can for sure try all these options

Did u sure that your battery is full charged...?

Try with a full charged battery, this problem occurs when u put a different fw to phone, my case was solved:
1. A battery fully
2. Making my phone a C2, with this file 4shared.com - online file sharing and storage - download pasaraC2_24p.rar (The same file in the attach). This don't crash your phone it's a mini flash that I use to repair my phone.
3. Any fw C2 compatible.

I hope this help u.

[aditya584]

thanx to everyone out here.
my phones up and working again.
i charged the battery usnig my dad's mot w270 and tried flashing to amins ee with radio comm and it woked.
thanx to everyone