Q: How can I enable Edge?

[chetan_2002_2003]

can any body post flash file or link to enable EDGE on ming?
which is already post in forum but m not able to find this......

[Dismal]

http://www.motorolafans.com/forums/s...ead.php?t=8298

it was in the modifications section

[chetan_2002_2003]

i know that but i cant find flash file.
by minor flashing we can solve restart prob after master clear or master reset.

[Dismal]

okay so are you actually reading the thread? the edge rar is right there in the very first post, then you search for radiocomm which is actually the first sticky in the modifications thread.
it is too easy to have to explain it, download radicomm and install, then download the edge rar from the first post in that link I gave you and open that with radiocomm

[Dismal]

here

http://www.motorolafans.com/forums/a...2&d=1173878845

[chetan_2002_2003]

u r really not understand my meaning.
this is edge script. edge.rar file
i want flash file (*.sbf)
which use to minor flash which will permanently solve problem of master reset/clear....
thnks 4 help

[Dismal]

k how about you explain the problem you are having then, I've read through these forums quite a bit and haven't yet found a flash file for edge that fixes a master reset/clear issue.

[Dismal]

if your problem is the phone rebooting after a master reset then here is a workaround found in the "modding your A1200" thread

J. HOW TO USE RADIOCOMM TO ENABLE EDGE

=============================================================================================
WARNING: REBOOT PROBLEM (added Aug 2007) There appears to be an issue with doing the following seem edit on the A1200 in that if you need to do a master clear or master reset after performing this seem edit, then your phone will continuously reboot. Here is what to do to fix this:
1. Turn phone off
2. Remove the SIM card.
3. Turn the phone on with no SIM and select 'no antenna' when prompted during bootup.
4. At this point, all your seem edits are gone (yuk).
5. Connect phone to computer and launch radiocomm
6. Perform the EDGE seem edit again with the SIM card out
7. Reboot phone
8. Turn off phone,
9. Reinstall the SIM card
10. Power it back up and problem should be fixed.

[chetan_2002_2003]

if your problem is the phone rebooting after a master reset then here is a workaround found in the "modding your A1200" thread

J. HOW TO USE RADIOCOMM TO ENABLE EDGE

=============================================================================================
WARNING: REBOOT PROBLEM (added Aug 2007) There appears to be an issue with doing the following seem edit on the A1200 in that if you need to do a master clear or master reset after performing this seem edit, then your phone will continuously reboot. Here is what to do to fix this:
1. Turn phone off
2. Remove the SIM card.
3. Turn the phone on with no SIM and select 'no antenna' when prompted during bootup.
4. At this point, all your seem edits are gone (yuk).
5. Connect phone to computer and launch radiocomm
6. Perform the EDGE seem edit again with the SIM card out
7. Reboot phone
8. Turn off phone,
9. Reinstall the SIM card
10. Power it back up and problem should be fixed.

i know that
i have already use this method many time,
but before few day, i found that some one make a flash file,
by flashing this file no need 2 seem edit every time after master reset/clear.
we can do master reset/clear as a normal phone,
so i need this flash file.

and thnks 4 help....