
Originally Posted by
bonafini
Sou novo por aqui, e recentemente comprei um a1200i fabricado no brasil e observei que o cartão de memória transflash aparece como inativo. Aonde vejo esta informação é clicando na barra que tem o relógio irá abrir uma tela com muitas funções. Descendo a barra de rolagem aparece o cartão transflas, e no meu caso dito " inativo" e o botâo ejetar desativado. Detalhe: o telefone está com cartão de 128 mb.
Pq ele aparece inativo?
Obrigado,
bonafini
Translation
Card of Memory a1200i I am new for here, and recently I bought one a1200i manufactured in Brazil and observed that the memory card transflash appears as inactive. Where I see this information is clicando in the bar that has the clock will go to open a screen with many functions. I descend the bar of clod roller appears the card transflas, and in mine said case "inactive" and botâo to eject disactivated. Detail: the telephone is with card of 128 mb. Pq it appears inactive? Debtor, bonafini
PLEASE POST IN ENGLISH, you will have the best chance of getting the answer that you need
POR FAVOR BORNE EM INGLÊS!!! você terá a mais melhor possibilidade de começar sua pergunta respondida
i think that what you are trying to do is get your phone to recognize your 128MB memory card
eu penso de que o que você está tentando fazer é começar seu telefone reconhecer seu cartão de memória 128mb?- SD Card does not appear in File Manager
If your SD card suddently stops being displayed in your File Manager then try the following**
1. Reboot phone
2. If still no luck then go to Viewer --> storage card then go back to File Manager and see if SD card has reappeared.
3. If still no luck then try a Master Reset
** If could also be happening if you do not disconnect the phone from your PC properly. When the phone is plugged into the PC in MASS STORAGE mode, the control of the SD card is given to the PC. If you disconnect the hardware properly via windows USB RELEASE process (like you should do for any USB drive), then the SD card is restored to the phone. If you are just pulling out the cable, then the card may not be restored to the phone correctly. If this is happening, then simply plug phone back into the PC and use the USB release process..
O cartão do SD não aparece no gerente da lima se seus batentes do cartão do SD suddently que estão sendo indicados em seu gerente da lima tentarem então o seguinte telefone
2. do reboot do **
1. se ainda nenhuma sorte a seguir for ao visor -- o cartão do armazenamento vai então para trás arquivar o gerente e ver se o cartão do SD reaparecer.
3. Se ainda nenhuma sorte tentar então uma restauração mestra ** se poderia também acontecer se você não desconectar o telefone de seu PC corretamente. Quando o telefone plugged no PC na modalidade do MEMÓRIA DE MASSA, o controle do cartão do SD está dado ao PC. Se você desconectar a ferragem corretamente através do processo da LIBERAÇÃO do USB das janelas (como você deve fazer para toda a movimentação do USB), o cartão do SD está restaurado então ao telefone. Se você for puxar justo para fora do cabo, a seguir o cartão não pode ser restaurado ao telefone corretamente. Se isto estiver acontecendo, a seguir simplesmente a parte traseira do telefone do plugue no PC e usa o processo da liberação do USB. que esta informação pode ser encontrada no FAQ pegajoso no alto deste forum