A1200E- will not be flashed correctly

[thommyboy]

hi there,
i got an a1200e from china and mischka helped me as a newbie a lot to understand it and try to flash it. for several days now i try to flash it with his 24xp30_C2_bint_EMEA_L4_debr_de03_mis.sbf but it never works correctly. what happens (reproducable) is:

- when the drivers are installed, flash will stop after "95% code group 43" with an error "error sending jump command" (YES- i tried several times, several USB, several RSD versions). after that the phone doesn't boot (first screen of moto-animation) and it takes 3-4 time remove the battery, start charging it, switch off/on with/(out) battery before the phone works again

- when the drivers are NOT installed and i start flashing (so during RSD they get installed) then flashing works to "100% code group 43" with the (known here) "The "secure_motorola_flash" interface could not be found..." error (always...)

Finally, although i get these errors and never get an "ok" the FW seems to be flashed because I've got mischkas german keyboard and some other features but when I check with WWW008W I still get
"R541_G_11.50.25RBP" the same I used to have before flashing.

Any idea? are the drivers from download section (dec. 2005!) the newest ones? what RSDlite is best for A1200E- maybe the "E" version needs special treatment?

Any help appriciated!
Thanks TOM

[thommyboy]

16:06:40, June 03, 2007
Line: 5072
ERROR: Phone[0000]: Error sending JUMP command Device API Error: 0xE003003D Command: JUMP
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0

16:06:40, June 03, 2007
Line: 6155
ERROR: Phone[0000]: Error jumping to RAM Downloader
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0

16:11:06, June 03, 2007
Line: 3551
ERROR: Phone[0000]: Flash failed.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0

16:11:06, June 03, 2007
Line: 573
ERROR: Flash failure: Phone[0000]: Error sending JUMP command Device API Error: 0xE003003D Command: JUMP (Error Code: e003003d),
Detailed Error Details: Direction of the Error=2000, Command Value=500000, Code Group Number=-32752
File: Y:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0

[Pondo]

well, you could try the 29P firmware witch is EDGE enabled and see if it works.

[thommyboy]

Well- actually mischkas "german version" in 24xp30 is more important to me than EDGE. But maybe I should just try another FW to see if it works- as long as I can go back to 24xp30... I'm just wondering what the error means- sounds like there is a (JUMP) command missing or working differently in my device API?

[ugulamjanov]

Hi, thommyboy!

I have same problem in last month, but can't do it any thing. You not along ))) with problem. If I can decide I will reply to you. If you have decide, pls, reply to me.

So, now your A1200T working or not? If is working & you have & using original FW, pls reply me & bcz, I need same FW to re-flash & using my phone.

Regards.

[thommyboy]

i've got an a1200E and flasing always stops with an error- do you get the same error as me?
after trying to flash, the phone won't boot immediatly- i have to remove the battery, switch on, remove battery, attach charger, switch on several times and after some time it will boot (and have the new FW)

[ugulamjanov]

What is FW now you using???
If is help to me to too I will be HAPPY!

[thommyboy]

i'm a newbie too- so maybe you should just post what FW you are using right now (dial WWW008W and it will be displayed) and hopefully someone will advise you as it's not possible to flash from any FW to any other...

[ugulamjanov]

Hi, Pindo!

Where is possible download 29P FW? Can you reply to me URL to download.

29P is A1200E_HK_R541_G_11.50.29P_GSZMINGET679EP013, right?

[Pondo]

http://rapidshare.com/files/33247494...1_1FF.rar.html


Good luck